# Trait core::cmp::PartialOrd

1.0.0 · source · [−]```
pub trait PartialOrd<Rhs: ?Sized = Self>: PartialEq<Rhs> {
fn partial_cmp(&self, other: &Rhs) -> Option<Ordering>;
fn lt(&self, other: &Rhs) -> bool { ... }
fn le(&self, other: &Rhs) -> bool { ... }
fn gt(&self, other: &Rhs) -> bool { ... }
fn ge(&self, other: &Rhs) -> bool { ... }
}
```

## Expand description

Trait for types that form a partial order.

The `lt`

, `le`

, `gt`

, and `ge`

methods of this trait can be called using
the `<`

, `<=`

, `>`

, and `>=`

operators, respectively.

The methods of this trait must be consistent with each other and with those of `PartialEq`

.
The following conditions must hold:

`a == b`

if and only if`partial_cmp(a, b) == Some(Equal)`

.`a < b`

if and only if`partial_cmp(a, b) == Some(Less)`

`a > b`

if and only if`partial_cmp(a, b) == Some(Greater)`

`a <= b`

if and only if`a < b || a == b`

`a >= b`

if and only if`a > b || a == b`

`a != b`

if and only if`!(a == b)`

.

Conditions 2–5 above are ensured by the default implementation.
Condition 6 is already ensured by `PartialEq`

.

If `Ord`

is also implemented for `Self`

and `Rhs`

, it must also be consistent with
`partial_cmp`

(see the documentation of that trait for the exact requirements). It’s
easy to accidentally make them disagree by deriving some of the traits and manually
implementing others.

The comparison must satisfy, for all `a`

, `b`

and `c`

:

- transitivity:
`a < b`

and`b < c`

implies`a < c`

. The same must hold for both`==`

and`>`

. - duality:
`a < b`

if and only if`b > a`

.

Note that these requirements mean that the trait itself must be implemented symmetrically and
transitively: if `T: PartialOrd<U>`

and `U: PartialOrd<V>`

then `U: PartialOrd<T>`

and `T: PartialOrd<V>`

.

### Corollaries

The following corollaries follow from the above requirements:

- irreflexivity of
`<`

and`>`

:`!(a < a)`

,`!(a > a)`

- transitivity of
`>`

: if`a > b`

and`b > c`

then`a > c`

- duality of
`partial_cmp`

:`partial_cmp(a, b) == partial_cmp(b, a).map(Ordering::reverse)`

### Derivable

This trait can be used with `#[derive]`

.

When `derive`

d on structs, it will produce a
lexicographic ordering
based on the top-to-bottom declaration order of the struct’s members.

When `derive`

d on enums, variants are ordered by their discriminants.
By default, the discriminant is smallest for variants at the top, and
largest for variants at the bottom. Here’s an example:

```
#[derive(PartialEq, PartialOrd)]
enum E {
Top,
Bottom,
}
assert!(E::Top < E::Bottom);
```

RunHowever, manually setting the discriminants can override this default behavior:

```
#[derive(PartialEq, PartialOrd)]
enum E {
Top = 2,
Bottom = 1,
}
assert!(E::Bottom < E::Top);
```

Run### How can I implement `PartialOrd`

?

`PartialOrd`

only requires implementation of the `partial_cmp`

method, with the others
generated from default implementations.

However it remains possible to implement the others separately for types which do not have a
total order. For example, for floating point numbers, `NaN < 0 == false`

and `NaN >= 0 == false`

(cf. IEEE 754-2008 section 5.11).

`PartialOrd`

requires your type to be `PartialEq`

.

If your type is `Ord`

, you can implement `partial_cmp`

by using `cmp`

:

```
use std::cmp::Ordering;
#[derive(Eq)]
struct Person {
id: u32,
name: String,
height: u32,
}
impl PartialOrd for Person {
fn partial_cmp(&self, other: &Self) -> Option<Ordering> {
Some(self.cmp(other))
}
}
impl Ord for Person {
fn cmp(&self, other: &Self) -> Ordering {
self.height.cmp(&other.height)
}
}
impl PartialEq for Person {
fn eq(&self, other: &Self) -> bool {
self.height == other.height
}
}
```

RunYou may also find it useful to use `partial_cmp`

on your type’s fields. Here
is an example of `Person`

types who have a floating-point `height`

field that
is the only field to be used for sorting:

```
use std::cmp::Ordering;
struct Person {
id: u32,
name: String,
height: f64,
}
impl PartialOrd for Person {
fn partial_cmp(&self, other: &Self) -> Option<Ordering> {
self.height.partial_cmp(&other.height)
}
}
impl PartialEq for Person {
fn eq(&self, other: &Self) -> bool {
self.height == other.height
}
}
```

Run## Examples

```
let x: u32 = 0;
let y: u32 = 1;
assert_eq!(x < y, true);
assert_eq!(x.lt(&y), true);
```

Run## Required Methods

source#### fn partial_cmp(&self, other: &Rhs) -> Option<Ordering>

#### fn partial_cmp(&self, other: &Rhs) -> Option<Ordering>

This method returns an ordering between `self`

and `other`

values if one exists.

##### Examples

```
use std::cmp::Ordering;
let result = 1.0.partial_cmp(&2.0);
assert_eq!(result, Some(Ordering::Less));
let result = 1.0.partial_cmp(&1.0);
assert_eq!(result, Some(Ordering::Equal));
let result = 2.0.partial_cmp(&1.0);
assert_eq!(result, Some(Ordering::Greater));
```

RunWhen comparison is impossible:

```
let result = f64::NAN.partial_cmp(&1.0);
assert_eq!(result, None);
```

Run## Provided Methods

## Implementors

### impl PartialOrd<Infallible> for Infallible

### impl PartialOrd<Which> for Which

### impl PartialOrd<Ordering> for Ordering

### impl PartialOrd<bool> for bool

### impl PartialOrd<char> for char

### impl PartialOrd<f32> for f32

### impl PartialOrd<f64> for f64

### impl PartialOrd<i8> for i8

### impl PartialOrd<i16> for i16

### impl PartialOrd<i32> for i32

### impl PartialOrd<i64> for i64

### impl PartialOrd<i128> for i128

### impl PartialOrd<isize> for isize

### impl PartialOrd<!> for !

### impl PartialOrd<str> for str

Implements comparison operations on strings.

Strings are compared lexicographically by their byte values. This compares Unicode code
points based on their positions in the code charts. This is not necessarily the same as
“alphabetical” order, which varies by language and locale. Comparing strings according to
culturally-accepted standards requires locale-specific data that is outside the scope of
the `str`

type.

### impl PartialOrd<u8> for u8

### impl PartialOrd<u16> for u16

### impl PartialOrd<u32> for u32

### impl PartialOrd<u64> for u64

### impl PartialOrd<u128> for u128

### impl PartialOrd<()> for ()

### impl PartialOrd<usize> for usize

### impl PartialOrd<TypeId> for TypeId

### impl PartialOrd<CpuidResult> for CpuidResult

**x86 or x86-64**only.

### impl PartialOrd<CStr> for CStr

### impl PartialOrd<Error> for Error

### impl PartialOrd<PhantomPinned> for PhantomPinned

### impl PartialOrd<NonZeroI8> for NonZeroI8

### impl PartialOrd<NonZeroI16> for NonZeroI16

### impl PartialOrd<NonZeroI32> for NonZeroI32

### impl PartialOrd<NonZeroI64> for NonZeroI64

### impl PartialOrd<NonZeroI128> for NonZeroI128

### impl PartialOrd<NonZeroIsize> for NonZeroIsize

### impl PartialOrd<NonZeroU8> for NonZeroU8

### impl PartialOrd<NonZeroU16> for NonZeroU16

### impl PartialOrd<NonZeroU32> for NonZeroU32

### impl PartialOrd<NonZeroU64> for NonZeroU64

### impl PartialOrd<NonZeroU128> for NonZeroU128

### impl PartialOrd<NonZeroUsize> for NonZeroUsize

### impl PartialOrd<Alignment> for Alignment

### impl PartialOrd<Duration> for Duration

### impl<'a> PartialOrd<Location<'a>> for Location<'a>

### impl<A: ?Sized, B: ?Sized> PartialOrd<&B> for &Awhere

A: PartialOrd<B>,

### impl<A: ?Sized, B: ?Sized> PartialOrd<&mut B> for &mut Awhere

A: PartialOrd<B>,

### impl<Dyn: ?Sized> PartialOrd<DynMetadata<Dyn>> for DynMetadata<Dyn>

### impl<P: Deref, Q: Deref> PartialOrd<Pin<Q>> for Pin<P>where

P::Target: PartialOrd<Q::Target>,

### impl<Ret, T> PartialOrd<fn(T) -> Ret> for fn (T₁, T₂, …, Tₙ) -> Ret

This trait is implemented for function pointers with up to twelve arguments.

### impl<Ret, T> PartialOrd<extern "C" fn(T) -> Ret> for extern "C" fn (T₁, T₂, …, Tₙ) -> Ret

This trait is implemented for function pointers with up to twelve arguments.

### impl<Ret, T> PartialOrd<extern "C" fn(T, ...) -> Ret> for extern "C" fn (T₁, T₂, …, Tₙ, ...) -> Ret

This trait is implemented for function pointers with up to twelve arguments.

### impl<Ret, T> PartialOrd<extern "C-unwind" fn(T) -> Ret> for extern "C-unwind" fn (T₁, T₂, …, Tₙ) -> Ret

This trait is implemented for function pointers with up to twelve arguments.

### impl<Ret, T> PartialOrd<extern "C-unwind" fn(T, ...) -> Ret> for extern "C-unwind" fn (T₁, T₂, …, Tₙ, ...) -> Ret

This trait is implemented for function pointers with up to twelve arguments.

### impl<Ret, T> PartialOrd<unsafe fn(T) -> Ret> for unsafe fn (T₁, T₂, …, Tₙ) -> Ret

This trait is implemented for function pointers with up to twelve arguments.

### impl<Ret, T> PartialOrd<unsafe extern "C" fn(T) -> Ret> for unsafe extern "C" fn (T₁, T₂, …, Tₙ) -> Ret

This trait is implemented for function pointers with up to twelve arguments.

### impl<Ret, T> PartialOrd<unsafe extern "C" fn(T, ...) -> Ret> for unsafe extern "C" fn (T₁, T₂, …, Tₙ, ...) -> Ret

This trait is implemented for function pointers with up to twelve arguments.

### impl<Ret, T> PartialOrd<unsafe extern "C-unwind" fn(T) -> Ret> for unsafe extern "C-unwind" fn (T₁, T₂, …, Tₙ) -> Ret

This trait is implemented for function pointers with up to twelve arguments.

### impl<Ret, T> PartialOrd<unsafe extern "C-unwind" fn(T, ...) -> Ret> for unsafe extern "C-unwind" fn (T₁, T₂, …, Tₙ, ...) -> Ret

This trait is implemented for function pointers with up to twelve arguments.

### impl<T, const LANES: usize> PartialOrd<Mask<T, LANES>> for Mask<T, LANES>where

T: MaskElement + PartialOrd,

LaneCount<LANES>: SupportedLaneCount,

### impl<T, const LANES: usize> PartialOrd<Simd<T, LANES>> for Simd<T, LANES>where

LaneCount<LANES>: SupportedLaneCount,

T: SimdElement + PartialOrd,

### impl<T: PartialOrd + Copy> PartialOrd<Cell<T>> for Cell<T>

### impl<T: PartialOrd + PartialEq> PartialOrd<(T,)> for (T₁, T₂, …, Tₙ)where

T: ?Sized,

This trait is implemented for tuples up to twelve items long.

### impl<T: PartialOrd + ?Sized> PartialOrd<ManuallyDrop<T>> for ManuallyDrop<T>

### impl<T: PartialOrd> PartialOrd<Option<T>> for Option<T>

### impl<T: PartialOrd> PartialOrd<Poll<T>> for Poll<T>

### impl<T: PartialOrd> PartialOrd<[T]> for [T]

Implements comparison of vectors lexicographically.